We are back open after a short break!
Used as a cutting agent due to the angular grains and the Moh’s hardness of 9. Typically used for speedy roughing work and matrix removal and smoothing. Usually not recommended for use with delicate or fragile fossils as it will destroy them.
Compatible with the majority of air abrasive units. Check that the nozzle and orifice are designed to take 20-37μm media. To be used with a clean, dry air supply to prevent clumping and clogging. Sieve before use. Please test on scrap rock before use.
Works well with the 25-50 micron media tank in the Vaniman Problasts. Sieve with a 60 micron sieve.
Learn more about Air Abrasives here.
Safety: For blasting applications, only use in a blast cabinet with an appropriate dust extraction system. Use appropriate personal protective equipment. Wear appropriate gauntlets when handling in blasting and polishing. In case of contact with eyes, wash immediately with plenty of water. If skin, eye or respiratory irritation persists, seek medical attention. This product is non-combustible. Noxious fumes may evolve in the event of fire.
Guaranteed safe checkout